Merlin Router Book

Technical Information Tel: 01509 610300 • Fax: 01509 610400 • Email: sales@merlintools.co.uk • www.merlintools.co.uk 109 Series 6026 6028 7026 7028 6100 6102 7100 7102 6103 7103 7180 7181 7182 7202 7210 7211 Page 29 43 45 72 73 77 78 Diameter 1xD 1xD 1xD 1xD 1xD 1xD 1.5mm 1/16" 3mm 0.33-0.38 1/8" 0.013-0.015" 6mm 0.38-0.43 0.43-0.48 1/4" 0.015-0.017" 0.017-0.019" 10mm 0.40-0.45 0.48-0.53 0.55-0.60 0.48-0.53 3/8" 0.016-0.018" 0.019-0.021" 0.022-0.024" 0.019-0.021" 12mm 0.45-0.50 0.53-0.58 0.60-0.66 0.53-0.58 0.71-0.76 0.53-0.58 1/2" 0.018-0.020" 0.021-0.023" 0.024-0.026" 0.021-0.023" 0.028-0.030" 0.021-0.023" 16mm 0.48-0.53 0.63-0.68 0.66-0.71 0.76-0.81 0.58-0.63 5/8" 0.019-0.021" 0.025-0.027" 0.026-0.028" 0.030-0.032" 0.023-0.025" 20mm 0.53-0.58 0.68-0.73 0.71-0.76 0.81-0.86 0.63-0.68 3/4" 0.021-0.023" 0.027-0.029" 0.028-0.030" 0.032-0.034" 0.025-0.027" Series 6026 6028 7026 7028 6100 6102 7100 7102 6103 7103 7180 7181 7182 7202 7210 7211 Page 29 43 45 72 73 77 78 Diameter 1xD 1xD 1xD 1xD 1xD 1xD 1.5mm 1/16" 3mm 0.33-0.38 1/8" 0.013-0.015" 6mm 0.38-0.43 0.38-0.43 1/4" 0.015-0.017" 0.015-0.017" 10mm 0.40-0.45 0.40-0.45 0.48-0.53 0.48-0.53 3/8" 0.016-0.018" 0.016-0.018" 0.019-0.021" 0.019-0.021" 12mm 0.45-0.50 0.45-0.50 0.53-0.58 0.53-0.58 0.68-0.73 0.48-0.53 1/2" 0.018-0.020" 0.018-0.020" 0.021-0.023" 0.021-0.023" 0.027-0.029" 0.019-0.021" 16mm 0.48-0.53 0.48-0.53 0.58-0.63 0.76-0.81 0.53-0.58 5/8" 0.019-0.021" 0.019-0.021" 0.023-0.025" 0.030-0.032" 0.021-0.023" 20mm 0.53-0.58 0.53-0.58 0.63-0.68 0.81-0.86 0.58-0.63 3/4" 0.021-0.023" 0.021-0.023" 0.025-0.027" 0.032-0.034" 0.023-0.025" Laminated Chipboard - Chip Load Per Tooth Laminated Plywood - Chip Load Per Tooth LW LW Depth of Cut 1 x D Use suggested chip load. 2 x D Decrease chip load by 25%. 3 x D Decrease chip load by 50%. Formulae: RPM = Feed Rate / (Number of Flutes x Chip Load) Feed Rate = RPM x Number of Flutes x Chip Load Chip Load = Feed rate / (RPM x Number of Flutes)